25.09.2014 | We invite you to visit our stand at the exhibition "Mashex-2014"!We invite you to visit our stand №C261, hall №3 at the 17th international exhibition of equipment and technologies of metalworking and working of composite materials "Mashex-2014", which will be organized from 28 to 31 October in the exhibition center "Crocus Expo", pavilion №1, Moscow, Russia. |
24.09.2014 | We invite you to visit our stand at the exhibition "Stankostroenie-2014"!We invite you to visit our stand №В222 , pavilion №1, hall №2 at the international specialized exhibition "Stankostroenie-2014", which will be organized from 14 to 17 October, 2014 in the exhibition center "Crocus Expo" (Moscow, Russia). |
|
|
|
QR series is the low-noise linear roller guideways, which have the ultra high rigidity and load capacity. The SynchMotionTM technology is implemented in the rail guideways of QR series, so the guideways have a low friction, smooth movement of the carriage, quiet operation and long service life. The rails of QR and RG series are identical, which allows to interchange each other.
The main feature of the guideway of QR series is a ultra high load capacity and very high rigidity, with a low noise level and smooth motion. Due to four row location of the rollers in the carriage, QR series has a uniform loadability in all directions. Due to the linear working contact surface, the deformation is minimized because of the perceived loads, and a very high rigidity and load capacity are achieved in all four directions of the load action.
Accuracy classes of QR series are classified into:
The choice depends on the equipment requirements.
Accuracy classes of non-interchangeable system
Accuracy of non-interchangeable system | ||||||||||||
Item | QR-20 | QR-25,30,35 | QR- 45 | |||||||||
Accuracy classes | H | P | SP | UP | H | P | SP | UP | H | P | SP | UP |
Dimensional tolerance of height Н | ±0.03 | -0.015 | -0.02 | -0.01 | ±0.04 | -0.04 | -0.02 | -0.01 | ±0.05 | -0.05 | -0.03 | -0.02 |
Dimensional tolerance of width N | ±0.03 | -0.015 | -0.02 | -0.01 | ±0.04 | -0.04 | -0.02 | -0.01 | ±0.05 | -0.05 | -0.03 | -0.02 |
Variation of height Н | 0.006 | 0.004 | 0.005 | 0.003 | 0.015 | 0.007 | 0.005 | 0.003 | 0.015 | 0.007 | 0.005 | 0.003 |
Variation of width N | 0.006 | 0.004 | 0.005 | 0.003 | 0.015 | 0.007 | 0.005 | 0.003 | 0.02 | 0.01 | 0.007 | 0.005 |
Running parallelism of block surface C to surface A | See table "Accuracy of running parallelism" | |||||||||||
Running parallelism of block surface D to surface B |
Accuracy classes of interchangeable system
Accuracy of interchangeable system | ||||||
Item | QR-20 | QR-25,30,35 | QR-45 | |||
Accuracy classes | H | P | H | P | H | P |
Dimensional tolerance of height Н | ±0.03 | ±0.015 | ±0.04 | ±0.02 | ±0.05 | ±0.025 |
Dimensional tolerance of width N | ±0.03 | ±0.015 | ±0.04 | ±0.02 | ±0.05 | ±0.025 |
Variation of height Н | 0.01 | 0.006 | 0.015 | 0.007 | 0.015 | 0.007 |
Variation of width N | 0.01 | 0.006 | 0.015 | 0.007 | 0.02 | 0.01 |
Running parallelism of block surface C to surface A | See table "Accuracy of running parallelism" | |||||
Running parallelism of block surface D to surface B |
Accuracy of running parallelism
Rail length (mm) | Accuracy (µm) | |||
H | P | SP | UP | |
100 | 7 | 3 | 2 | 2 |
100-200 | 9 | 4 | 2 | 2 |
200-300 | 10 | 5 | 3 | 2 |
300-500 | 12 | 6 | 3 | 2 |
500-700 | 13 | 7 | 4 | 2 |
700-900 | 15 | 8 | 5 | 3 |
900-1100 | 16 | 9 | 6 | 3 |
1100-1500 | 18 | 11 | 7 | 4 |
1500-1900 | 20 | 13 | 8 | 4 |
1900-2500 | 22 | 15 | 10 | 5 |
2500-3100 | 25 | 18 | 11 | 6 |
3100-3600 | 27 | 20 | 14 | 7 |
3600-4000 | 28 | 21 | 15 | 7 |
Preload classes
The preload can be set for each profile rail guideway. For this purpose oversized balls are used. Usually a negative clearance between the rolling surface and balls is used in the profile rail guideways for increase of the rigidity and accuracy. There are three types of standard preload for different application conditions.
Class | Code | Preload | Examples of application |
Light preload | Z0 | 0,02-0.04C | Certain load direction, low impact, low precision required |
Medium preload | ZA | 0.07C-0.09C | High rigidity required, high precision required |
Heavy preload | ZB | 0.012C-0.014C | Super high rigidity required, with vibration and impact |
"C" means the dynamic load capacity in the column "Preload".
Interchangeable type
QR - W - 25 - C - A - E - ZA - P + ZZ/E2 |
||||||||
QR - Series |
W - Block type: |
25 - Model size |
С - Load type: |
A - Block mounting type |
E - Special block |
ZA, Z0 - Preload code |
P - Precision code |
ZZ - Dust protection2 |
QR - W - 35 - C - C - E - 2 - R - 1640 - E - ZA - P - ll + KK/E2/RC |
|||||||||||||
QR - Series |
W - Block type: |
35 - Model size |
С - Load type |
A - Block mounting type |
E - Special block None - Standard block |
2 - Number of blocks per rail |
R - Rail mounting type |
1640 - Rail length (mm) |
E - Special rail |
ZA, Z0, ZB - Preload code |
P - Precision code |
ll - Number of rails per matched set1 |
KK - Dust protection2 |
1. The roman numerals indicate the number of guideways in the set.
2. The absence of designation indicates the standard designation (end seal and bottom seal):
ZZ: End seal, bottom seal and scraper;
KK: Double seals, bottom seal and scraper;
DD: Double seals, bottom seal.
Rail designation of the QR series (QR and RG series use identical rails)
QR - R - 25 - R - 1240 - E - P + RC |
|||||||
QR/RG - Series |
R - Interchangeable rail |
25 - Model size |
R - Rail mounting type: T: Bottom |
1240 - Rail length (mm) |
E - Special rail |
P - Precision code (H,P) |
RC - Reinforced cap |
Open the catalog in pdf format | |
Download catalog in zip format |