25.09.2014 | We invite you to visit our stand at the exhibition "Mashex-2014"!We invite you to visit our stand №C261, hall №3 at the 17th international exhibition of equipment and technologies of metalworking and working of composite materials "Mashex-2014", which will be organized from 28 to 31 October in the exhibition center "Crocus Expo", pavilion №1, Moscow, Russia. |
24.09.2014 | We invite you to visit our stand at the exhibition "Stankostroenie-2014"!We invite you to visit our stand №В222 , pavilion №1, hall №2 at the international specialized exhibition "Stankostroenie-2014", which will be organized from 14 to 17 October, 2014 in the exhibition center "Crocus Expo" (Moscow, Russia). |
|
|
|
Accuracy classes of QE series are classified into:
Accuracy classes of non-interchangeable system
Accuracy of non-interchangeable guideways | ||||||||||
Item | QE-15,20 | QE-25,30,35 | ||||||||
Accuracy Classes | C | H | P | SP | UP | C | H | P | SP | UP |
Dimensional tolerance of height H | ±0.1 | ±0.03 | -0.03 | -0.015 | -0.008 | ±0.1 | ±0.04 | -0.04 | -0.02 | -0.01 |
Dimensional tolerance of width N | ±0.1 | ±0.03 | -0.03 | -0.015 | -0.008 | ±0.1 | ±0.04 | -0.04 | -0.02 | -0.01 |
Variation of height H | 0.02 | 0.01 | 0.006 | 0.004 | 0.003 | 0.02 | 0.015 | 0.007 | 0.005 | 0.003 |
Variation of width N | 0.02 | 0.01 | 0.006 | 0.004 | 0.003 | 0.03 | 0.015 | 0.007 | 0.005 | 0.003 |
Running parallelism of block surface C to surface A | Watch the table "Accuracy of Running Parallelism" | |||||||||
Running parallelism of block surface D to surface B |
Accuracy classes of interchangeable system
Accuracy of interchangeable guideways | ||||||
Item | QE-15,20 | QE-25,30,35 | ||||
Accuracy Classes | C | H | P | C | H | P |
Dimensional tolerance of height H | ±0.1 | ±0.03 | ±0.015 | ±0.1 | ±0.04 | ±0.02 |
Dimensional tolerance of width N | ±0.1 | ±0.03 | ±0.015 | ±0.1 | ±0.04 | ±0.02 |
Variation of height H | 0.02 | 0.01 | 0.006 | 0.02 | 0.015 | 0.007 |
Variation of width N | 0.02 | 0.01 | 0.006 | 0.03 | 0.015 | 0.007 |
Running parallelism of block surface C to surface A | Watch the table "Accuracy of Running Parallelism" | |||||
Running parallelism of block surface D to surface B |
Accuracy of Running Parallelism
Rail Length (mm) | Accuracy (μm) | ||||
C | H | P | SP | UP | |
100 | 12 | 7 | 3 | 2 | 2 |
100-200 | 14 | 9 | 4 | 2 | 2 |
200-300 | 15 | 10 | 5 | 3 | 2 |
300-500 | 17 | 12 | 6 | 3 | 2 |
500-700 | 20 | 13 | 7 | 4 | 2 |
700-900 | 22 | 15 | 8 | 5 | 3 |
900-1100 | 24 | 16 | 9 | 6 | 3 |
1100-1500 | 26 | 18 | 11 | 7 | 4 |
1500-1900 | 28 | 20 | 13 | 8 | 4 |
1900-2500 | 31 | 22 | 15 | 10 | 5 |
2500-3100 | 33 | 25 | 18 | 11 | 6 |
3100-3600 | 36 | 27 | 20 | 14 | 7 |
3600-4000 | 37 | 28 | 21 | 15 | 7 |
![]() |
Definition The preload can be set for each profile rail guideway. For this purpose oversized balls are used. Usually a negative clearance between the rolling surface and balls is used in the profile rail guideways for increase of the rigidity and accuracy. The curve shows that rigidity doubles with the strong preload. To avoid premature wear of the system, the preload over ZA type is not recommended for profile guideways, size of which is less than 20. |
Preload classes
There are three types of standard preload for different application conditions.
Class | Code | Preload | Condition |
Very Light Preload | Z0 | 0-0.02C | Certain load direction,low impact, low precision required |
Light Preload | ZA |
0.03C-0.05C |
Low load and high precision required |
Medium Preload | ZB |
0.06C-0.08C |
High rigidity required, with vibration and impact |
Note: The "C" in the preload column denotes basic dynamic load rating.
Class | Interchangeable Guideway | Non-Interchangeable Guideway |
Preload classes | Z0, ZA | Z0,ZA,ZB |