The system of linear guides series LA galvanized and stainless steel.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available from stock in Moscow
Guides: LAZ26, LAZ40.
Carriages: PAZ26, PAZ40.
Linear roller guide series MR is ideal for heavy-duty work.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Linear guide systems ML series with a concave profile of the raceways.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
T-Race Rollers are used for high load capacity in the radial and axial directions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
The multi-linear system of FLEXRACE with a large number configurations carriages and rails.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Curved rail Series BSC from cold drawn galvanized steel. They are produced on request.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Telescopic rail system Series TLR with the possibility of self-regulation.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Economical series of telescopic rails T-Race.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Telescopic slides TLQ series for applications with frequent cycles.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Precision hardened, ground shafts. The hardness of 59-65 HRC. Length of 3000 mm. Diameters from 4 to 100 mm.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
The diameter of the shaft - ø08 ÷ 40.
Linear ball bushings with steel casing, plastic cage, circlip groove.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
LME08UU ÷ LME40, LMF08 ÷ LMF40.
6 sizes, depending on the load. Ease of installation and compact. The low weight and high stiffness.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow: KK40, KK60.
High-speed move. Low noise. Reduced friction due to the plastic cage balls.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Maximum speed: 100 mm to 3000 mm. Engine power: 30 watts to 750 watts. Drive Type: ball screw, timing belt.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High accuracy and speed of movement. Protection against dust. Complectation with a servomotor (optional).
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High accuracy and efficiency. Easy installation and low weight. Protection from dust and dirt.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Closed design. Support any servomotors. Easy to install and compact.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High performance and low cost of manufacture. Precise and simple linear movement.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High load characteristics and accuracy. The smooth movement of heavy loads at high speeds.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High load characteristics and accuracy. High-speed movement and repeatability.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Moving along the axis Z. The high accuracy, speed and load characteristics.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Fixing elements, centering rings and sensors for linear modules with toothed belt drive.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Linear actuators with loads from 600 to 12,000 H. Voltage 12 V, 24 V or 36 V.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series TBB and TC. Various number of inputs power actuators. A set of additional functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series TH, TNP, TDH and TFH. Various versions. A set of additional functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Various accessories for connecting actuators and power units with a set of additional functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Equipped with a switching power supply. Reliable mechanical stability and high voltage characteristics.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Made from high quality aluminum alloy. Sizes from 25 to 130. The gear ratios from 7.5 to 100.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Precision planetary gearboxes used in modern industrial technology.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on customer request.
The accuracy of 2-5 arc. min. The gear ratio of 1: 1000. It can be fitted with a variety of servo motors.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on customer request.
Backlash-free ball gearboxes with high precision positioning.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on customer request.
Servo ProNet with the possibility control the direct-feedback stroke, acceleration, speed and level of inertia.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Kits are available in stock in Moscow: ProNet-02EA-EC + EMJ-02ASA22WR
ProNet-04EA-EC + EMJ-04ASA22WR
ProNet-08EA-EC + EMJ-08ASB22WR
ProNet-E-02A + EMJ-02APA22WR
ProNet-E-04A + EMJ-04APB22WR
ProNet-E-08A + EMJ-08APB22WR
ProNet-E-10A + EMJ-10ABB22WR
Servo EDB / EDC capacity from 750 W to 5 kW and 200 kW to 1, respectively.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servo EHD capacity from 2 kW to 34 kW. Used in conjunction with the servo motors series EMB, EMT and EMT2.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servo EDS capacity from 200 W to 1000 kW. Used to drive the two servo motors simultaneously.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
EMG servo power from 1 kW to 5 kW. Protection class - IP65. Is used to rotate the drive shaft of different mechanisms.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
EML servo power from 1 kW to 4 kW. Protection class - IP65. Is used to rotate the drive shaft of different mechanisms.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
EMJ servo power from 200 W to 1 kW. The maximum speed 4500 rpm.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Kits are available in stock in Moscow: ProNet-02EA-EC + EMJ-02ASA22WR
ProNet-04EA-EC + EMJ-04ASA22WR
ProNet-08EA-EC + EMJ-08ASB22WR
ProNet-E-02A + EMJ-02APA22WR
ProNet-E-04A + EMJ-04APB22WR
ProNet-E-08A + EMJ-08APB22WR
ProNet-E-10A + EMJ-10ABB22WR
Servo motors EMB capacity from 7.5 kW to 22 kW. Protection class - IP44. Actuators used in various machines.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servo EMT capacity from 35 kW to 105 kW. Used in conjunction with the servo series EHD.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servomotors EMT2 cover a wide range of capacities and are used in combination with servo series EHD.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
F1000 panel has a high speed response, flexibility in use and easy to application interface service.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Fulling Motor stepper motors are characterized by high precision, stable performance, low noise levels and a variety of models.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
ZK Stepper motors are easy to use, stable operation, high reliability and easy maintenance.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Rolled ball screws without end machining with flange nuts DIN 69051. Accuracy class - C7 of ISO, DIN.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
Винт ШВП - Ø8, шаг - 2.5, гайка - тип RSI
Винт ШВП - Ø10, шаг - 2.5, гайка - тип RSI
Винт ШВП - Ø10, шаг - 4, гайка - тип RSI
Винт ШВП - Ø12, шаг - 4, гайка - тип RSI
Винт ШВП - Ø16, шаг - 5, гайка - тип FSI
Винт ШВП - Ø16, шаг - 10, гайка - тип FSI
Винт ШВП - Ø20, шаг - 5, гайка - тип FSI
Винт ШВП - Ø20, шаг - 10, гайка - тип FSC
Винт ШВП - Ø25, шаг - 5, гайка - тип FSC
Винт ШВП - Ø25, шаг - 10, гайка - тип FSC
Винт ШВП - Ø32, шаг - 5, гайка - тип FSC
Винт ШВП - Ø32, шаг - 10, гайка - тип FSC
Винт ШВП - Ø40, шаг - 5, гайка - тип FSC
Винт ШВП - Ø40, шаг - 10, гайка - тип FSC.
Ground ball screws high accuracy degree. They are used in the positioning of actuated assemblies CNC machine tools.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Bearing Supports different types. Series BK, BF for horizontal installation. Series FK, FF for vertical installation.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
BF10 ÷ BF30
BK10 ÷ BK30
FF10 ÷ FF30
FK10 ÷ FK25
R1 Series ball screws with rotating nut. High positioning accuracy, ease of installation, stiffness.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Ball screw series Super-T for high speed and silent movement. Low vibration and noise, smooth operation.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series Cool Type ballscrew with the cooling system for high-speed motion with high dynamic loads.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Ball screw for high loads. Accuracy class - C7 of ISO, DIN. High axial load and acceleration.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Ball screws with dust protection designed to prevent small particles and iron filings under the nut body.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Racks warehouse in Moscow. Pressure angle: 20 °. Material: Steel C45 - As1443.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
M10L3000, M15L3000, M20L3000, M25L3000,
M30L3000, M40L3000
Cylindrical gears from a warehouse in Moscow. Pressure angle: 20 °. Material: Steel C45.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
MZ1012, MZ1018, MZ1024, MZ1032, MZ1512,
MZ1518, MZ1524, MZ2012, MZ2018, MZ2024,
MZ2512, MZ2524, MZ3012, MZ3024, MZ4012,
MZ4018, MZ4024
Trapezoidal screws and nuts from a warehouse in Moscow. Material: Steel C15 (1.0401); Bronze RG7 GC-CuSn7ZnPb (DIN 2.1090).
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ TR20x4x3000R,
TR24x5x3000R, TR30x6x3000R,
TR36x6x3000R, TR40x7x3000R.
Гайки: BR12x3, BR16x4, BR20x4, BR24x5,
BR30x6, BR36x6, BR40x7.
Prevent unwanted vibration during operation of industrial plants. Load range of 50 to 4500 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow: OB 31, OB 70.
Types A, B, C, D, E. Standard hardness - 55 Shore. Material - rubber NK.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow: 15.15, 20.15, 25.20, 25.30, 30.20, 30.30, 40.30, 40.40, 50.30, 50.40.
Designed for active / passive vibration isolation equipment. The load of 190 to 2000 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
Sizes 48/23, 62/30, 77/30, 92/45.
Designed for active / passive vibration isolation equipment. The load of 9 to 2500 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
BR 0025, BR 0050, BR 0100, BR 0200.
Designed for ceiling or wall mounting. Load range of 15 to 70 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
They are used to protect equipment from vibrations and collisions. V-shape. Material - rubber NK.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
They are used in the frequency range of 50 Hz alternating load. Material - rubber NK, neoprene, silicone, etc.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
They are used in systems with a high degree of load and high reliability requirements. Have strengthened structure.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
30x30x5800St, 30x60x5800St,
40x40x5800St, 40x80x5800St,
80х80x5800H, 45x45x5800St,
45x90x5800St, 50x50x5800St,
50x100x5800St, 100x100x5800St.
Accessories for aluminum machining profile. Material - nickel-plated steel.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
T-nut 08-M6, M8-10.
T-bolt with flange nut:
groove - 8 mm, 10 mm.
Angle Connectors:
30/30, 30/60, 40/40, 40/80, 45/45, 45/90,
80/80.
Imported radial bearings from world famous manufacturers: SKF, INA, SNR, KOYO, FAG, NSK, TIMKEN, etc.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Made of steel with zinc coating. Large load capacity. Easy assembly / disassembly.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow.
25.09.2014 | We invite you to visit our stand at the exhibition "Mashex-2014"!We invite you to visit our stand №C261, hall №3 at the 17th international exhibition of equipment and technologies of metalworking and working of composite materials "Mashex-2014", which will be organized from 28 to 31 October in the exhibition center "Crocus Expo", pavilion №1, Moscow, Russia. |
24.09.2014 | We invite you to visit our stand at the exhibition "Stankostroenie-2014"!We invite you to visit our stand №В222 , pavilion №1, hall №2 at the international specialized exhibition "Stankostroenie-2014", which will be organized from 14 to 17 October, 2014 in the exhibition center "Crocus Expo" (Moscow, Russia). |
|
|
|
In this section you will find the characteristics of different power supplies for the actuators. The power supplies have different power and different number of inputs for actuator connection. There are also different sets of built-in functions.