The system of linear guides series LA galvanized and stainless steel.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available from stock in Moscow
Guides: LAZ26, LAZ40.
Carriages: PAZ26, PAZ40.
Linear roller guide series MR is ideal for heavy-duty work.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Linear guide systems ML series with a concave profile of the raceways.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
T-Race Rollers are used for high load capacity in the radial and axial directions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
The multi-linear system of FLEXRACE with a large number configurations carriages and rails.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Curved rail Series BSC from cold drawn galvanized steel. They are produced on request.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Telescopic rail system Series TLR with the possibility of self-regulation.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Economical series of telescopic rails T-Race.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Telescopic slides TLQ series for applications with frequent cycles.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Precision hardened, ground shafts. The hardness of 59-65 HRC. Length of 3000 mm. Diameters from 4 to 100 mm.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
The diameter of the shaft - ø08 ÷ 40.
Linear ball bushings with steel casing, plastic cage, circlip groove.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
LME08UU ÷ LME40, LMF08 ÷ LMF40.
6 sizes, depending on the load. Ease of installation and compact. The low weight and high stiffness.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow: KK40, KK60.
High-speed move. Low noise. Reduced friction due to the plastic cage balls.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Maximum speed: 100 mm to 3000 mm. Engine power: 30 watts to 750 watts. Drive Type: ball screw, timing belt.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High accuracy and speed of movement. Protection against dust. Complectation with a servomotor (optional).
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High accuracy and efficiency. Easy installation and low weight. Protection from dust and dirt.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Closed design. Support any servomotors. Easy to install and compact.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High performance and low cost of manufacture. Precise and simple linear movement.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High load characteristics and accuracy. The smooth movement of heavy loads at high speeds.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
High load characteristics and accuracy. High-speed movement and repeatability.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Moving along the axis Z. The high accuracy, speed and load characteristics.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Fixing elements, centering rings and sensors for linear modules with toothed belt drive.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Linear actuators with loads from 600 to 12,000 H. Voltage 12 V, 24 V or 36 V.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series TBB and TC. Various number of inputs power actuators. A set of additional functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series TH, TNP, TDH and TFH. Various versions. A set of additional functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series TP1-TP9. Various power and the number of inputs for connecting actuators. A set of built-in functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Various accessories for connecting actuators and power units with a set of additional functions.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Equipped with a switching power supply. Reliable mechanical stability and high voltage characteristics.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Made from high quality aluminum alloy. Sizes from 25 to 130. The gear ratios from 7.5 to 100.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Precision planetary gearboxes used in modern industrial technology.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on customer request.
The accuracy of 2-5 arc. min. The gear ratio of 1: 1000. It can be fitted with a variety of servo motors.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on customer request.
Backlash-free ball gearboxes with high precision positioning.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on customer request.
Servo ProNet with the possibility control the direct-feedback stroke, acceleration, speed and level of inertia.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Kits are available in stock in Moscow: ProNet-02EA-EC + EMJ-02ASA22WR
ProNet-04EA-EC + EMJ-04ASA22WR
ProNet-08EA-EC + EMJ-08ASB22WR
ProNet-E-02A + EMJ-02APA22WR
ProNet-E-04A + EMJ-04APB22WR
ProNet-E-08A + EMJ-08APB22WR
ProNet-E-10A + EMJ-10ABB22WR
Servo EDB / EDC capacity from 750 W to 5 kW and 200 kW to 1, respectively.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servo EHD capacity from 2 kW to 34 kW. Used in conjunction with the servo motors series EMB, EMT and EMT2.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servo EDS capacity from 200 W to 1000 kW. Used to drive the two servo motors simultaneously.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
EMG servo power from 1 kW to 5 kW. Protection class - IP65. Is used to rotate the drive shaft of different mechanisms.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
EML servo power from 1 kW to 4 kW. Protection class - IP65. Is used to rotate the drive shaft of different mechanisms.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
EMJ servo power from 200 W to 1 kW. The maximum speed 4500 rpm.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Kits are available in stock in Moscow: ProNet-02EA-EC + EMJ-02ASA22WR
ProNet-04EA-EC + EMJ-04ASA22WR
ProNet-08EA-EC + EMJ-08ASB22WR
ProNet-E-02A + EMJ-02APA22WR
ProNet-E-04A + EMJ-04APB22WR
ProNet-E-08A + EMJ-08APB22WR
ProNet-E-10A + EMJ-10ABB22WR
Servo motors EMB capacity from 7.5 kW to 22 kW. Protection class - IP44. Actuators used in various machines.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servo EMT capacity from 35 kW to 105 kW. Used in conjunction with the servo series EHD.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Servomotors EMT2 cover a wide range of capacities and are used in combination with servo series EHD.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
F1000 panel has a high speed response, flexibility in use and easy to application interface service.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Fulling Motor stepper motors are characterized by high precision, stable performance, low noise levels and a variety of models.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
ZK Stepper motors are easy to use, stable operation, high reliability and easy maintenance.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Rolled ball screws without end machining with flange nuts DIN 69051. Accuracy class - C7 of ISO, DIN.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
Винт ШВП - Ø8, шаг - 2.5, гайка - тип RSI
Винт ШВП - Ø10, шаг - 2.5, гайка - тип RSI
Винт ШВП - Ø10, шаг - 4, гайка - тип RSI
Винт ШВП - Ø12, шаг - 4, гайка - тип RSI
Винт ШВП - Ø16, шаг - 5, гайка - тип FSI
Винт ШВП - Ø16, шаг - 10, гайка - тип FSI
Винт ШВП - Ø20, шаг - 5, гайка - тип FSI
Винт ШВП - Ø20, шаг - 10, гайка - тип FSC
Винт ШВП - Ø25, шаг - 5, гайка - тип FSC
Винт ШВП - Ø25, шаг - 10, гайка - тип FSC
Винт ШВП - Ø32, шаг - 5, гайка - тип FSC
Винт ШВП - Ø32, шаг - 10, гайка - тип FSC
Винт ШВП - Ø40, шаг - 5, гайка - тип FSC
Винт ШВП - Ø40, шаг - 10, гайка - тип FSC.
Ground ball screws high accuracy degree. They are used in the positioning of actuated assemblies CNC machine tools.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Bearing Supports different types. Series BK, BF for horizontal installation. Series FK, FF for vertical installation.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
BF10 ÷ BF30
BK10 ÷ BK30
FF10 ÷ FF30
FK10 ÷ FK25
R1 Series ball screws with rotating nut. High positioning accuracy, ease of installation, stiffness.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Ball screw series Super-T for high speed and silent movement. Low vibration and noise, smooth operation.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Series Cool Type ballscrew with the cooling system for high-speed motion with high dynamic loads.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Ball screw for high loads. Accuracy class - C7 of ISO, DIN. High axial load and acceleration.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Ball screws with dust protection designed to prevent small particles and iron filings under the nut body.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Racks warehouse in Moscow. Pressure angle: 20 °. Material: Steel C45 - As1443.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
M10L3000, M15L3000, M20L3000, M25L3000,
M30L3000, M40L3000
Cylindrical gears from a warehouse in Moscow. Pressure angle: 20 °. Material: Steel C45.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
MZ1012, MZ1018, MZ1024, MZ1032, MZ1512,
MZ1518, MZ1524, MZ2012, MZ2018, MZ2024,
MZ2512, MZ2524, MZ3012, MZ3024, MZ4012,
MZ4018, MZ4024
Trapezoidal screws and nuts from a warehouse in Moscow. Material: Steel C15 (1.0401); Bronze RG7 GC-CuSn7ZnPb (DIN 2.1090).
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ TR20x4x3000R,
TR24x5x3000R, TR30x6x3000R,
TR36x6x3000R, TR40x7x3000R.
Гайки: BR12x3, BR16x4, BR20x4, BR24x5,
BR30x6, BR36x6, BR40x7.
Prevent unwanted vibration during operation of industrial plants. Load range of 50 to 4500 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow: OB 31, OB 70.
Types A, B, C, D, E. Standard hardness - 55 Shore. Material - rubber NK.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow: 15.15, 20.15, 25.20, 25.30, 30.20, 30.30, 40.30, 40.40, 50.30, 50.40.
Designed for active / passive vibration isolation equipment. The load of 190 to 2000 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
Sizes 48/23, 62/30, 77/30, 92/45.
Designed for active / passive vibration isolation equipment. The load of 9 to 2500 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
BR 0025, BR 0050, BR 0100, BR 0200.
Designed for ceiling or wall mounting. Load range of 15 to 70 kg.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
They are used to protect equipment from vibrations and collisions. V-shape. Material - rubber NK.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
They are used in the frequency range of 50 Hz alternating load. Material - rubber NK, neoprene, silicone, etc.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
They are used in systems with a high degree of load and high reliability requirements. Have strengthened structure.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
30x30x5800St, 30x60x5800St,
40x40x5800St, 40x80x5800St,
80х80x5800H, 45x45x5800St,
45x90x5800St, 50x50x5800St,
50x100x5800St, 100x100x5800St.
Accessories for aluminum machining profile. Material - nickel-plated steel.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow:
T-nut 08-M6, M8-10.
T-bolt with flange nut:
groove - 8 mm, 10 mm.
Angle Connectors:
30/30, 30/60, 40/40, 40/80, 45/45, 45/90,
80/80.
Imported radial bearings from world famous manufacturers: SKF, INA, SNR, KOYO, FAG, NSK, TIMKEN, etc.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available on request.
Made of steel with zinc coating. Large load capacity. Easy assembly / disassembly.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Available in a warehouse in Moscow.
25.09.2014 | We invite you to visit our stand at the exhibition "Mashex-2014"!We invite you to visit our stand №C261, hall №3 at the 17th international exhibition of equipment and technologies of metalworking and working of composite materials "Mashex-2014", which will be organized from 28 to 31 October in the exhibition center "Crocus Expo", pavilion №1, Moscow, Russia. |
24.09.2014 | We invite you to visit our stand at the exhibition "Stankostroenie-2014"!We invite you to visit our stand №В222 , pavilion №1, hall №2 at the international specialized exhibition "Stankostroenie-2014", which will be organized from 14 to 17 October, 2014 in the exhibition center "Crocus Expo" (Moscow, Russia). |
|
|
|